Vigo Chrome Towel Space Heater 350 W

Towel radiator electric chrome 350 watts 500 X 1105

The towel radiator has a capacity of 350 watts and is provided with full chrome which makes the radiator a jewel in your bathroom
At the bottom of the heating you have the control with even an ECO position.

The towel radiator is delivered fully filled to you.
This radiator works stand alone so no heating installation is required

1. Open the package and remove the radiator with the protective nylon cover. Tear the protective nylon cover outside the box without damaging the device and remove the mounting unit.

2. Correct space must be measured to ensure that the connection cable can be easily connected to the electrical connection. After determining the installation area, the holes must be marked according to the method shown in figure 4.

3. After marking the points according to figure 4, the holes are drilled by a drill with a diameter of 10 mm and the plastic dowel ( see figure 3 part A) that are located in the installation items, are inserted into these holes.

4. Attach the anchors (4 pieces) (see figure 3 – part B) to the plastic dowel with the ring (see figure 3 – part C) and (see figure 3 – part D).

5. Place the plastic parts (see figure 3 – part E) in the lower mounting bracket (see figure 3 – part G) and mount the mounting brackets (see figure 3 – part FG) on the tubes with the screw (see figure 3). – part H).

6. Attach the installation brackets (4 pieces) to the towel warmer and attach the towel warmer to the wall by screwing the installation brackets onto anchors (see figure 3 – part B) on the wall (see figure 3 – part I).

NOTE: protect the control unit against bumps during installation.

1. Place the grounded socket to operate your device.
2. Press the on / off button on your device for 3 seconds to switch on.
3. Press the on / off button on your device for eco mode.
4. Press the on / off button on your device for the max mode.
5. Press the On / Off button on your device for 3 seconds to switch off