Pintyplus Black Lead Chalk Paint Spray 400 ml

It can be used to decorate many surfaces. Suitable for staining of wood, furniture boards, canvas, iron, plastic, board and even glass and expanded polystyrene. Rinse with soap and water within 15 minutes. Maximum coverage and fast drying. Its water-based formula is more environmentally friendly than solvent based paints.
It does not contain aggressive solvents and therefore does not etch polystyrene surfaces. To achieve a smooth surface, we recommend using several thin coats, and after drying, sand lightly to achieve the desired surface. Specifications: Packaging: 400ml / 520cc = 2m2. Drying: surface 20 minutes, full 1 hour.

Can be repainted with the same paint after 1 hour. Can be repainted with other paint after 24 hours. How to apply: The surface to be painted should be dry, clean, free of dust and grease.
Spray from 25-30cm horizontally and vertically onto the surface to be painted.

It is recommended that two thin coats be used instead of one, so that a much smoother and smoother surface is achieved and the paint does not flow.

When painting is complete, turn the can upside down and blow until only gas comes out of the can so we can clean the nozzle and use the spray later. Tips: If you want to protect the surface with lacquer, the water-based lacquer, either PINTY PLUS-AQUA or PINTY PLUS – ART & CRAFT, is the best choice. When applied on a plastic surface, we recommend the use of PINTY PLUS – TECH plastic primer for the best coverage and finish. Do not use on powered appliances or in well ventilated areas.