Pintyplus Zinc Primer Spray 400 ml

High performance coating rich in zinc.

A minimum of 99% pure zinc.

Electro-chemically adheres to the metal support.

Excellent weather resistance.

High hardness and flexibility.

Applications:

Specially indicated for maximum protection of metal surfaces from corrosion such as: metal structures, fences, tanks, welded joints, repair of galvanized parts, railway equipment, etc.

Yield:

400ml +/- 2m²

Total drying in 1 hour.
Recovery in 1 hour.

Manual:

The surface to be painted must be clean, dry and free of all contaminants.

Clean rust and dirt if necessary with a wire brush.

Remove grease stains with a solvent.

Shake the aerosol vigorously for one minute, the mixing balls should emit the corresponding click.

Spray from a distance of 25/30 cm., Applying in thin and rapid layers, first in the horizontal direction then in the vertical direction, It is preferable to apply 2 thin layers rather than one thicker in order to ” achieve uniform coverage and avoid runoff.

Once the operation is complete, invert the box and spray until only the gas comes out in order to clean the diffuser.

Do not use on equipment connected to electric current and apply in ventilated areas.

Advice :

For a colored finish, repaint with PINTYPLUS BASIC or EVOLUTION.

On surfaces already painted, if the adhesion is good, only perform a light sanding, otherwise, completely remove the paint